Electric Fish Waste Separator

Product Accessories

• One stainless steel filter screen (≈0.2mm/70 mesh) and one (≈0.4mm/40 mesh), one special wrench, one set of inlet/outlet joint elbows, one blowdown ball valve hose, and six stainless steel pipe hoops.
• Connecting hoses are available in three lengths: 1m, 50cm, and 30cm. They cannot be cut. You can choose at most two hoses. By default, one 50cm and one 30cm hose will be delivered. If you need hard pipe connection, note “send two 50cm PVC pipes, 2 elbows, and 2 live joints”.

Special Instructions

• The fish feces separation efficiency cannot reach 100%. Granular formed feces can be separated by over 95%, while powdery and suspended ones cannot.
• To achieve the ideal effect, let the feces pass through the separator before they are scattered. For example:
  1. Remove the spiral piece or brush in the overflow pipe (to avoid scattering fish feces; not removing it in some fish tanks may cause gas accumulation and slow drainage).
  2. For the unreasonable fake right-angle overflow with a large gap (which sucks up feces only after they are powdered), solve it with air stones or partitions.
  3. Install a wave-making pump to blow the feces to the suction port before they are powdered.
• Consult customer service if you have any questions.

Note: Currently, motor supply is insufficient, and a wait time of 20 to 30 days is required.

Universal worldwide compatibility. If the plug socket size does not match, an adapter plug will be provided.